Note: SU’s wireless operates over both 2.4GHz and 5GHz except for select locations where 2.4GHz is disabled at various access points to minimize congestion for the limited channels available via 2.4GHz (mostly in the reshalls).
Wifi devices require configuration before they can connect to the SU-secure wireless network. Please follow the guides below for instructions on configuring your specific device type for connecting to SU-secure.
Windows 8
This guide provides step-by-step instructions for both automatically and manually configuring your Windows 8 computer to connect to SU-secure. Attempt automatic configuration first. Only attempt manual configuration if automatic configuration is unsuccessful. SU-secure is only available for use by Seattle University students, faculty, staff, and Jesuits. For information about guest wireless access, please visit the guest account page at: https://www.seattleu.edu/support/guides/guest-accounts/
Remove Existing SU-secure Profile
Click on the wifi icon in the system tray.
Right click on SU-secure and select ‘Forget this network’.
Automatic Configuration
Per the instructions above, ensure you have removed any existing SU-secure profiles from your device.
Visit the ITS downloads page at https://www.seattleu.edu/support/downloads/ You may be prompted to enter your SeattleU credentials to access this page.
Locate the ‘Autoconfigure SU-secure’ heading and download the Windows Devices configuration package.
Locate the ‘AutoConfigureWindows-SU-secure.zip’ file in your downloads folder
Right-click the folder, select ‘Extract All’ and then click on the ‘Extract’ button.
The extracted contents of ‘Autoconfigure SU-secure.zip’ will appear.
Double click the ‘RUNME – Auto configure SU-secure’ file to automatically configure your SU-secure connection.
Select SU-secure from the list of available networks, click connect, and enter your SeattleU credentials in the authentication prompt that appears.
Manual Configuration
Add SU-secure to your wifi network list
Click on the start button, type ‘network and sharing center’ in the search bar, and click on the Network and Sharing Center button. The Network and Sharing Center will appear.
Click on the ‘Set up a new connection or network’ button to add a new wireless network.
The Set Up a Connection or Network menu will appear. Select ‘Manually connect to a wireless network’ and press ‘Next’ to continue.
The initial connection set up menu will appear. Enter the following information and then click ‘Next’ to add SU-secure to your list of wireless networks
Network name: SU-secure
Security type: WPA2-Enterprise
Encryption type: AES
Security key: Leave blank
Start this connection automatically: Checked
Connect even if the network is not broadcasting: Unchecked
Configure your connection
A window will appear that confirms SU-secure was successfully added. Select ‘Change connection settings’ to continue to the wireless properties menu.
Click on the ‘Security’ tab at the top of the wireless properties menu.
Once on the Security tab, ensure the following settings are configured:
Network authentication method: Microsoft: Protected EAP (PEAP)
Remember my credentials for this connection each time I’m logged on: Checked
Then click the ‘Settings’ button next to the network authentication method drop down bar.
The Protected EAP properties menu will appear. Make the following changes and click ‘OK’:
Validate server certificate: Checked.
Connect to these servers: Checked.
Server list: oitias2.seattleu.edu;
Trusted Root Certification Authorities: Check ‘AddTrust External CA Root’ and then scroll down in the list to check ‘USERTrust RSA Certification Authority’
Do not prompt user to authorize new servers or trusted certification authorities: Unchecked.
Select Authentication Method: Secured password (EAP-MSCHAP v2).
Click on ‘Configure…’ next to the Authentication method dropdown bar and uncheck ‘Automatically use my windows logon name and password’ in the popup box that appears, then click ‘OK’.
Enable Fast Reconnect: Checked.
Click ‘OK’ on the Protected EAP properties menu.
Click ‘OK’ on the Wireless Network Properties menu.
Click ‘Close’ on the Manually Connect to a Wireless Network menu.
Click on the wifi icon in the system tray to bring up the list of available wireless networks. Select SU-secure from the list and click ‘Connect’.
You will be prompted to enter your credentials. Enter your SU credentials and click ‘OK’ to connect.
Verify that you are connected
Upon successful connection, your system tray menu will show that you are connected to SU-secure:
If you are unable to connect your device to SU-secure after following the above steps please continue to the troubleshooting guide appropriate for your device.
Windows 10
This guide provides step-by-step instructions for both automatically and manually configuring your Windows 10 computer to connect to SU-secure. Attempt automatic configuration first. Only attempt manual configuration if automatic configuration is unsuccessful. SU-secure is only available for use by Seattle University students, faculty, staff, and Jesuits. For information about guest wireless access, please visit the guest account page at: https://www.seattleu.edu/support/guides/guest-accounts/
Remove Existing SU-secure Profile
Click on the wifi icon in the system tray and click on ‘Network settings’
Click on the Wi-Fi settings menu, then click ‘Manage known networks’
On the ‘Manage known networks’ menu, select ‘SU-secure’ and click ‘Forget’
Automatic Configuration
Per the instructions above, ensure you have removed any existing SU-secure profiles from your device.
Visit the ITS downloads page at https://www.seattleu.edu/support/downloads/ . You may be prompted to enter your SeattleU credentials to access this page.
Locate the ‘Autoconfigure SU-secure’ heading and download the Windows Devices configuration package.
Locate the ‘AutoConfigureWindows-SU-secure.zip’ file in your downloads folder
Right-click the folder, select ‘Extract All’ and then click on the ‘Extract’ button
The extracted contents of ‘Autoconfigure SU-secure.zip’ will appear
Double click the ‘RUNME – Auto configure SU-secure’ file to automatically configure your SU-secure connection
Select SU-secure from the list of available networks, click connect, and enter your SeattleU credentials in the authentication prompt that appears
Manual Configuration
Add SU-secure to your wifi network list
Click on the start button, type ‘Network and Sharing Center’ in the search bar, and hit the enter key. The Network and Sharing Center will appear.
Click on the ‘Set up a new connection or network’ button to add a new wireless network.
The Set Up a Connection or Network menu will appear. Select ‘Manually connect to a wireless network’ and press ‘Next’ to continue.
The initial connection set up menu will appear. Enter the following information and then click ‘Next’ to add SU-secure to your list of wireless networks
Network name: SU-secure
Security type: WPA2-Enterprise
Encryption type: AES
Security key: Leave blank
Start this connection automatically: Checked
Connect even if the network is not broadcasting: Unchecked
Configure your connection
A window will appear that confirms SU-secure was successfully added. Select ‘Change connection settings’ and continue to the ‘Wireless Network Properties’ menu
Click on the ‘Security’ tab at the top of the menu.
Once on the Security tab, ensure the following settings are configured:
Network authentication method: Microsoft: Protected EAP (PEAP)
Remember my credentials for this connection each time I’m logged on: Checked
Then click the ‘Settings’ button next to the network authentication method drop down bar.
The Protected EAP properties menu will appear. Make the following changes and click ‘OK’:
Validate server certificate: Checked
Connect to these servers: Checked
Server list: oitias2.seattleu.edu;
Trusted Root Certification Authorities: Check ‘AddTrust External CA Root’ and then scroll down in the list to check ‘USERTrust RSA Certification Authority’
Do not prompt user to authorize new servers or trusted certification authorities: Unchecked
Select Authentication Method: Secured password (EAP-MSCHAP v2)
Click on ‘Configure…’ next to the Authentication method dropdown bar and uncheck ‘Automatically use my windows logon name and password’ in the popup box that appears, then click ‘OK’
Enable Fast Reconnect: Checked
Click ‘OK’ on the Protected EAP properties menu
Click ‘OK’ on the Wireless Network Properties menu
Click ‘Close’ on the Manually Connect to a Wireless Network menu.
Click on the wifi icon in the system tray to bring up the list of available wireless networks. Select SU-secure from the list and click ‘Connect’.
Enter your SeattleU credentials in the login window that appears and click ‘OK’ to connect.
Verify that you are connected
Upon successful connection, the system tray menu will show that you are connected to SU-secure:
If you are unable to connect your device to SU-secure after following the above steps please continue to the troubleshooting guide appropriate for your device.
Mac OS X
This guide provides step-by-step instructions for both automatically and manually configuring your Mac OSX computer to connect to SU-secure. Attempt automatic configuration first. Only attempt manual configuration if automatic configuration is unsuccessful. SU-secure is only available for use by Seattle University students, faculty, staff, and Jesuits. For information about guest wireless access, please visit the guest account page at: https://www.seattleu.edu/support/guides/guest-accounts/
Remove Existing SU-secure Profile
Press the wifi icon in the status menu and select ‘Open Network Preferences’
On the ‘Network’ menu, select your Wi-Fi network and click on ‘Advanced…’
In the ‘Wi-Fi’ tab, select SU-secure from the list and click on the minus button to remove it. Then click ‘OK’.
Click the ‘Apply’ button on the Network menu to apply the settings.
Automatic Configuration
Per the instructions above, ensure you have removed any existing SU-secure profiles from your device.
Visit the ITS downloads page at https://www.seattleu.edu/support/downloads/ . You may be prompted to enter your SeattleU credentials to access this page.
Locate the ‘Auto Configure SU-secure’ heading and download the Apple Devices configuration package.
Locate the ‘AutoConfigureApple-SU-secure.mobileconfig’ file in your downloads and double click it to begin installation.
Click ‘Continue’ to install the SU-secure profile. Press ‘Continue’ again when you are prompted that the author of the profile is unknown.
Enter your SeattleU credentials when prompted and click ‘Install’.
If prompted, enter administrator credentials and click ‘OK’.
Manual Configuration
Connect to SU-secure.
Click on the wireless icon in the system toolbar to bring up the list of available wireless networks.
Ensure that your wifi antenna is switched on, and then select ‘SU-secure’ from the list of available networks.
Enter your credentials.
A window will appear that prompts you to enter your credentials. Enter your SeattleU username and password, ensure ‘Remember this network is checked’, and click ‘Join’
You may be asked to verify the security certificate. Verify that you are authenticating to either oitias1.seattleu.edu or oitias2.seattleu.edu and then click ‘Continue’ to accept the certificate and connect.
Verify that you are connected
Upon successful connection, your wifi menu will show a check mark next to SU-secure:
If you are unable to connect your device to SU-secure after following the above steps please continue to the troubleshooting guide appropriate for your device.
iPhone and iPad
This document provides step-by-step instructions for both automatically and manually configuring your Apple iPhone or iPad to connect to SU-secure. Attempt automatic configuration first. Only attempt manual configuration if automatic configuration is unsuccessful. SU-secure is only available for use by Seattle University students, faculty, staff, and Jesuits. For information about guest wireless access, please visit the guest account page at: https://www.seattleu.edu/support/guides/guest-accounts/
Remove Existing SU-secure Profile
Tap on the Settings app
Tap on the wifi settings menu
Tap on the blue ‘i’ next to SU-secure
Tap the ‘Forget this network’ button.
Automatic Configuration
Per the instructions above, ensure you have removed any existing SU-secure profiles from your device.
Using Safari as your web browser, visit the ITS downloads page at https://www.seattleu.edu/support/downloads/ . You may be prompted to enter your SeattleU credentials to access this page.
Locate the ‘Auto Configure SU-secure’ heading and download the Apple Devices configuration package.
Run the ‘AutoConfigureApple-SU-secure.mobileconfig’ file
Tap ‘Install’ in the top right corner
Enter your device passcode if prompted
Tap ‘Install’ in the top right corner, and ‘Install’ once more on the popup that appears
Enter your SeattleU username and tap ‘Next’, then enter your SeattleU password and tap next
Manual Configuration
Connect to SU-secure
Tap on the settings app from the home screen.
Tap on the wifi button on the settings menu to open up the wifi settings menu.
On the wifi settings menu, ensure that the wifi switch is set to on (green), and then tap on SU-secure to connect.
Configure your connection
Enter your SeattleU username and password when prompted and tap ‘Join'
You will be prompted to accept a security certificate. Verify that the certificate has the following properties and tap ‘Trust’:
Name: oitias1.seattleu.edu OR oitias2.seattleu.edu
Issued by: InCommon Server CA
Verify that you are connected
Upon successful authentication, your wifi settings menu will show a checkmark next to SU-secure:
If you are unable to connect your device to SU-secure after following the above steps:
Validate that there are no static IP address or DNS settings that are configured on your device. Devices that are configured with a static IP address or static DNS settings will not be able to connect to SU-secure
Validate that the username and password being used are your current SeattleU username and password
Continue to the guide appropriate for your device.
Android
This guide provides step-by-step instructions for configuring your Android phone to connect to SU-secure. SU-secure is only available for use by Seattle University students, faculty, staff, and Jesuits. For information about guest wireless access, please visit the guest account page at: https://www.seattleu.edu/support/guides/guest-accounts/
Remove Existing SU-secure Profile
Tap on the Settings app to open up the settings menu
Tap on the Wi-Fi settings option
Tap and hold on the SU-secure network and then tap on ‘Forget network’
Manual Configuration
Connect to SU-secure
Tap on the Settings app to open up the settings menu:
On the settings menu, tap on the ‘Wi-Fi’ button under the Wireless and Networks section to open the wifi menu.
On the wifi menu, ensure the wifi slider at the top of the page is set to ‘On’, then select ‘SU-secure’ from the list of available networks by tapping on it.
Configure your connection
After tapping on SU-secure, a menu will appear that will allow you to change settings for your connection. Enter your connection settings as follows and tap connect to connect:
EAP method: PEAP
Phase 2 Authentication: MSCHAPV2
CA certificate: Unspecified
Identity: Your SeattleU username (i.e. doej@seattleu.edu)
Anonymous identity: Leave blank
Enter password: Your SeattleU password
Verify that you are connected
Upon successful authentication, your wifi menu will show that you are connected to SU-secure:
If you are unable to connect your device to SU-secure after following the above steps please continue to the troubleshooting guide appropriate for your device.
Chrome OS
This guide provides step-by-step instructions for both automatically and manually configuring your ChromeOS device to connect to SU-secure. SU-secure is only available for use by Seattle University students, faculty, staff, and Jesuits. For information about guest wireless access, please visit the guest account page at: https://www.seattleu.edu/support/guides/guest-accounts/
Remove Existing SU-secure Profile
Click on your account photo
Click on the wifi settings button
Click the ‘Network settings’ gear button
Click the wifi settings button
Click the ‘Known networks’ button
Click the ‘…’ button next to SU-secure
Select ‘Forget’ to forget the SU-secure network
Manual Configuration
Select SU-secure the list of available wifi networks
Click on your account photo
Click on the wifi settings button
Select SU-secure from the list of available networks
Configure settings
After selecting SU-secure, a window will appear that asks for connection settings. Change the following settings:
EAP Method: PEAP
EAP Phase 2 Authentication: MSCHAPv2
Server CA certificate: Do not check
Identity: Your SeattleU username, i.e doej@seattleu.edu
Password: Your SeattleU password
Click the connect button to connect
Verify that you are connected
Upon successful connection, the wifi status indicator will show that you are connected to SU-secure:
If you are unable to connect your device to SU-secure after following the above steps please continue to the troubleshooting guide appropriate for your device.
Need additional help? Submit a ticket in our new portal here: IT Service Desk Help Center